TEKBOX EMV Zubehör - EMV Precompliance - LISN

TBLC08 50uH Line Impedance Stabilisation Network LISN - CISPR 16

Overview
The TBLC08 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for testing single phase, AC-powered equipment with supply voltages up to maximum 240V. Conducted noise can be measured on the phase and on the neutral conductor. The TBLC08 is equipped with a switchable limiter/attenuator and an artificial hand connection.
The device is available with country-specific DUT connectors

Fragen Sie uns an für eine Offerte! >>> Kontakt

Specifications

Frequency range: 9 kHz to 30 MHz
Impedance: 50 Ω ║ (50 µH + 5 Ω)
Artificial hand: 220 pF + 511 Ω
Switchable PE: 50 Ω ║ 50 µH
Limiter / attenuator: 150 kHz to 30 MHz; 10 dB
Air core inductors
Line voltage: max. 240V / 50 – 60 Hz, CAT ‖
Max. current: 8A @ 23°C
DUT socket: country specific
Measurement connector: 50 Ω BNC
Power connector: IEC 60320 C13
Operating Temperature Range: +5°C … + 40°C; 5% to 80% RH
Safety: Safety Class I, IEC 1010-01

Datenblatt >>>> TBLC08 LISN Manual [934 KB]

Application
EMC pre-compliance testing of conducted noise

Herstellerlink: 50uh-line-impedance-stabilisation-network-lisn-cispr16

Ebenfalls empfehlenswert

 

985.00 CHF

Artikel-Nr: TBLC08  

incl. 7.7% MwSt. zzgl. Versand

ab Lager lieferbar  
 
Anzahl:   St



NEW: TBAS1 RF Attenuator Set The TBAS1 RF attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box 135.00 CHF

NEW: TBAS2 SMA Attenuator/Termination The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beech wood box 199.00 CHF

NEW: TBAS3 - 10W N RF Attenuator Set The TBAS3 RF attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box 199.00 CHF

NEW: TBST120/60/60/2 Shielded Tent The TBST-120/60/60/2 is a shielded tent, designed to suppress interference from ambient noise during EMC pre-compliance measurements. With a size of 120 cm x 60 cm x 60 cm, it can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells 2'975.00 CHF

NEW: TBCP1-150 RF Current Monitoring Probe The TBCP1-150 is a fixed aperture RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3dB bandwidth of approximately 150 MHz and is characterized and usable over the frequency range from 10kHz to 250 MHz. The aperture of the RF current monitoring probe is 25 mm. Its transfer impedance is > 14 dB Ohm in the range from 100 kHz to 150 MHz. 495.00 CHF

NEW: TBCG1 Radiating Comb Generator TBCG1 Radiating Comb Generator 145.00 CHF

NEW: TBCG2 Comb Generator TBCG2 Comb Generator 145.00 CHF

TBLC08- LISN 50uH TEKBOX EMV Zubehör - EMV Precompliance - LISN TBLC08 50uH Line Impedance Stabilisation Network LISN - CISPR 16 985.00 CHF

TBOH01 - LISN 5uH 5uH Line Impedance Stabilisation Network LISN - CISPR 25The TBOH01 5µH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz 375.00 CHF